3510/3510KP/3512/3512KP System Manual
4-6
2.
Press
ENTER
. Copy should still be highlighted, but the cursor will appear on the
Edit line.
3.
Move the cursor on the last character to copy and press
ENTER
.
The copied item does not appear on the screen until you select
Paste
.
Paste
Insert a sequence of scan codes (which were saved in memory using Copy) into the
macro. To paste a sequence of scan codes that were previously copied, position the
cursor where you want the text to appear and then press
F
1.
Select
Paste
and then
press
ENTER
.
Codes
Displays a table of keys and their scan codes in Hex. See the Codes section later in
this chapter for a complete code listing.
Hex/Decimal
Toggles between displaying the scan codes in Hex and Decimal formats.
Insert
Toggles between insert and overtype mode.
Upload Menu
Use the Upload Menu to choose which data to load. Choices in this menu are:
Combo keypad, Keypad Version, and Exit
.
Combo Keypad
Commands the keyboard controller to send its entire macro set for the keypad.
Keypad Version
Commands the keyboard controller to send its firmware revision number.
Exit
Returns to the Main Menu.
Note
Only one macro set may reside in memory at one time.
