3115T Thin Line Industrial Flat Panel PC Chapter 3 – POS-370 Control Board and BIOS Setup
58
141876(E)
You determine when the password is required within the BIOS Features Setup
Menu under Security Option.
If the security option is set to password will be
required both at boot and at entry to Setup. If the security option is set to
Setup, prompting only occurs when trying to enter Setup.
Exit Selecting
Save & Exit Setup
Pressing Enter on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing ‘Y’ stores the selections made in the menus in CMOS – a special section of
memory that stays on after you turn your system off. The next time you boot your
computer, the BIOS configures your system according to the Setup selections stored
in CMOS. After saving the values the system is restarted again.
Exit Without Saving
Pressing Enter on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing in CMOS any change. The previous
selections remain in effect. This exits the Setup utility and restarts your computer.
