3115T Thin Line Industrial Flat Panel PC Chapter 3 – POS-370 Control Board and BIOS Setup
51
141876(E)
Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power saving
mode.
Always on
Monitor will remain on during power saving modes.
Suspend Off
Monitor blanked when the systems enters the Suspend
mode.
Susp.Stby Off
Monitor blanked when the system enters either Suspend or
Standby modes
All Modes
Monitor blanked when the system enters any power saving
mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H
SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standards to select video power management values.
Switch Function
You can choose whether or not to permit your system to enter complete Suspend
mode. Suspend mode offers greater power savings, with a correspondingly longer
awakening period..
The choice: Break/Wake, Disabled.
Hot Key Function As
Select ‘Enabled’ if your system has a hot key for soft power off.
The choice: Enabled, Disabled.
HDD Off After
By default, this item is disabled, meaning that no matter the mode the rest of the
system, the hard drive will remain ready. Otherwise, you have a range of choices
from 1 to 15 minutes or ‘Suspend’. This means that you can elect to have your hard
disk drive be turned off after a selected number of minutes or when the rest of the
system goes into a Suspend mode.
Power Button Over Ride
You could press the power button for more than four seconds forces the system to
enter the Soft-Off state when the system has “hung.”
The choice: Soft-Off, Delay 4 Sec.
