3115T Thin Line Industrial Flat Panel PC Chapter 3 – POS-370 Control Board and BIOS Setup
41
141876(E)
Note
If “other” boot option is enabled, the unit will boot from the
CompactFlash (if the CF card has boot files loaded).
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: Enabled/Disabled.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal
A pin in the keyboard controller controls
GateA20
Fast
Lets chipset control GateA20
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
The choice: Enabled/Disabled.
Typematic Rate (Chars/Sec)
The Typematic rate sets the number of times a second keystroke is repeated when the
key is held down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
The Typematic delay sets the delay time after the key is held down before it begins
to repeat the keystroke.
The choice: 250, 500, 750, 1000.
