1510 Industrial PC Computer System Manual
24
Installing Drivers
This section describes how to install the drivers associated with the 1510. Information
about installing drivers for your computer is included in the
Documentation and Support
Library
CD shipped with your computer, or on the web at www.xycom.com.
Ethernet Drivers
Note
If you want to use Ethernet capabilities with Windows 95, your system
must have BIOS revision level 1.1 or higher.
If MS-DOS
Ò
is installed on your system, the Ethernet drivers are supplied on your hard
drive in the C:\netdrv directory, but they are not installed.
To install the MS-DOS Ethernet drivers,
1.
At the C: prompt, type “cd netdrv”.
2.
Once the C:\netdrv path is specified, type “install”.
3.
Follow the on-screen instructions to complete installation.
If you install Windows
Ò
on your system, Xycom provides the Ethernet drivers. They can
be found on the Ethernet Drivers disk that ships with your system, on the
Support Li-
brary
CD, or on the web at www.xycom.com.
Note
If you install Windows
Ò
NT 4.0 or Windows
Ò
95 on your system, be
aware that the Ethernet drivers included in those operating systems do
not work with the Ethernet controller in the 1510. You must use the
drivers provided by Xycom.
These drivers can be found on the Ethernet Drivers disk
or Documenta-
tion Support Library
CD that ships with your system, or on the web at
www.xycom.com.
Video Drivers
Video drivers for each operating system are on the diskettes included with the documen-
tation kit. Drivers are also included on the
Documentation and Support Library CD
or on
the web at www.xycom.com. To install a video driver, refer to the INSTALL.TXT file
on the diskette for your operating system.