1510 Industrial PC Computer System Manual
20
PS/2 keyboard and mouse connector
Both a keyboard and a mouse can be connected to the PS/2 compatible port through the
Y adapter cable included with your unit. Connect a mouse to the cable that has the mouse
icon on it, and a keyboard into the cable that has a keyboard icon on it. If connecting
only a keyboard, you can connect directly to the PS/2 compatible connector on the rear
of the unit. If connecting only a mouse, the mouse must be connected using the Y adapter
cable port. Either the mouse or the keyboard can be used alone and connected using the
Y-cable.
Figure 3-4. Y-Cable
Refer to Table B-5 for the `keyboard/mouse connector pin assignments.
Note
Refer to
Appendix B
pinout information.
Installing Options
Warning
For qualified service personnel only.
Caution
Turn off the unit before installing internal hardware.
Internal Hardware Options
This section describes how to install internal hardware options.
Y adapter cable for rear keyboard
and mouse connector.