Chapter One - Introduction
11
Unpacking the System
When you remove the 1510 from its box, verify that you have the parts listed below.
Save the box and inner wrapping in the event you need to reship the unit.
·
1510 unit
·
Documentation kit, which includes:
·
Diagnostic software disk (units shipped with MS-DOS only)
·
Documentation Support Library CD (documentation and drivers)
·
1510 manual
·
CPU manual
·
Drivers
·
Xycom Automation Recovery Media and documentation for MS-DOS, Windows
95, Windows NT
·
AC power cord
·
Mounting Hardware
·
Four 10-32 x 5/8 screws
·
Mounting brackets for vertical or horizontal mounting
·
Miscellaneous:
·
Screws
·
Cables
·
Ties
·
Feet
Quick Start-up
This section gives you the steps to get the 1510 up and running without explaining the
capabilities and options of the system.
Note
Refer to Chapter 3 for a detailed outline of the 1510’s components.
Warning
Turn off the power to the unit and disconnect the power cord before ad-
justing the inside or the outside of the computer.
To prepare the system for use, perform the following steps.
7.
Attach a keyboard to the keyboard port.
8.
Attach other optional equipment following the instructions in Chapter 3.
9.
Attach a monitor to the VGA connector.