2
Using the repeater function
The ANE01 has three options for repeating:
1) No repeating (default), both dip-switches to OFF (number side)
2) Repeat only original telegrams (level 1), only dipswitch 1 to ON
3) Repeat original and 1-time repeated telegrams: both dipswitches to ON
A disconnect and reconnect of the power of the ANE01 is required before changes to these
dipswitches will take effect.
Verifying the enOcean antenna
When the beta firmware is installed, the enOcean function will automatically be activated.
This option can be turned on or off on the basic settings page of the xxter unit. On the status
page you can see whether xxter has properly recognised and connected to the antenna.
Short introduction to the enOcean telegram format
With the new configuration tool you can configure enOcean components. Every enOcean
device (a switch, actor, dimmer, sensor, etc.) can either transmit or receive telegrams or do
both.
Every telegram has a sender address and a channel number, which is used to identify every
device. In xxter you can create an alias for every device, for easier recognition.
Every enOcean telegram also has a specific type and function, which depends on the used
hardware of the device. xxter now supports a great number of different types of telegrams
and more will added in the near future. In case you want to apply a certain type of hardware
that is not yet supported, please inform us and we will add it to the configuration options.
For xxter it is important to know which types of telegrams are supported by which device.
Newer devices will automatically supply the type of the telegram, when the device is teached
in. Older devices however do not support this feature and the type needs to be selected
manually.
To look up the telegram type, a list of all supported brands and devices are included in
addendum 2. In case you cannot find the device you want to configure, please let us know so
we can further expand this list.
