![background image](http://html.mh-extra.com/html/laird/s24512bpx/s24512bpx_manual_670426001.webp)
164-00009_GF_AA
S24512BPX
2.4 and 5.5 GHz High Performance Antenna
SAFETY
The S24512BPX and all associated equipment should
be installed in accordance with applicable local and
national electrical code guidelines to ensure safe
operation.
LOCATION
For best results, mount the S24512BPX at ceiling or
roof level near the center of the coverage area. A line-
of-sight path between the antenna and active floor
location generally works best. Although 2.4 GHz signals
penetrate cubical dividers and interior partitions with little
attenuation, reinforced block walls, banks of metal
cabinets, or steel shelving may attenuate signals or
cause multipath
,
a condition where reflected signals
interfere with the primary signal. Avoid mounting next
to a column or vertical support that could create a shadow
zone of reduced coverage to one portion of the room.
Each antenna comes with a ceiling-tile support-runner
mount and a U-bolt style pole mount.
Important Notice: Please read all instructions
carefully before attempting to install and use this
product.
APPLICATIONS
Laird Technologies' S24512BPX is a ruggedized
high-performance omnidirectional collinear antenna
used for 2.4 and 5.5 GHz RF-distribution systems.
Its flattened radiation pattern focuses energy along
the horizontalplane to provide extended coverage
in large rooms or vaulted areas (see Figure-1).
The S24512BPX may also be pole-mounted for
use in exterior locations.
SPECIFICATIONS
Model
S24512BPX
Frequency, MHz
2400-2500 /5150-5850
Gain, dBi
3 dBi Typical for 2.4 GHz6
Wind Surface Area ft.
2
(m
2
)
0.07 (0.006)
Wind Survivability, mph (kph)
125 (200)
Weight, lb. (kg)
0.30 (0.14)
Height, in. (cm)
9.6 (24.5)
Nominal Impedance, Ohms
50
VSWR
2.0:1 nominal
Power Handling, Watts
10
Radiating Element
PC board
Enclosure
Polycarbonate
Feed
Reverse polarity SMA (male)
36
"
(91.4 cm) Plenum
Ceiling mount
S24512BPX
Coverage area
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, NY 11742 - 1300
6 dBi Typical for 5.5 GHz
Elevation Plane Beamwidth 50° @ 2400-2500 MHz
20° @ 5150-5850 MHz
Azimuth Plane Beamwidth 360°
48 PERIMETER ROAD, MANCHESTER, NH 03103
Tel: 603-627-7877-Fax: 603-627-1764
email: [email protected] - web: www.cushcraft.com
LIMITED WARRANTY
LAIRD TECHNOLOGIES, P.O. BOX 4680, MANCHESTER, NEW HAMPSHIRE
03108, WARRANTS TO THE ORIGINAL CONSUMER PURCHASER FOR TWO YEARS
FROM DATE OF PURCHASE THAT EACH LAIRD TECHNOLOGIES ANTENNA IS FREE OF
DEFECTS IN MATERIAL OR WORKMANSHIP. IF, IN THE JUDGMENT OF LAIRD,
ANY SUCH ANTENNA IS DEFECTIVE, THEN LAIRD TECHNOLOGIES WILL, AT
ITS OPTION, REPAIR OR REPLACE THE ANTENNA AT ITS EXPENSE WITHIN THIRTY
DAYS OF THE DATE THE ANTENNA IS RETURNED (AT PURCHASER'S EXPENSE) TO
LAIRD OR ONE OF ITS AUTHORIZED REPRESENTATIVES. THIS WARRANTY IS
IN LIEU OF ALL OTHER EXPRESSED WARRANTIES, ANY IMPLIED WARRANTY IS
LIMITED IN DURATION TO ONE YEAR. LAIRD TECHNOLOGIES SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT
FROM A DEFECT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT\
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THIS
WARRANTY DOES NOT EXTEND TO ANY PRODUCTS WHICH HAVE BEEN SUBJECT
TO MISUSE, NEGLECT, ACCIDENT OR IMPROPER INSTALLATION, ANY REPAIRS OR
ALTERATIONS OUTSIDE OF THE LAIRD TECHNOLOGIES FACTORY WILL NULLIFY
THIS WARRANTY.
SPECIFICATIONS SUBJECT T O CHANGE WITHOUT NOTICE
LAIRD TECHNOLOGIES shall not be liable for any incidental or
consequential damages which may result from a defective, or use, or improper
or otherwise or installation, improper or otherwise.
Please contact your vendor for technical support and warranty service
Warranty and Liability