19
7.7 PATTERN SETUP
Pattern Number:
[1~4]
Select Pattern number to edit. If a selected pattern number is not defined, ‘UNDEFINED’ will be displayed under the selected
pattern number.
Clear Pattern:
[CANCEL/OK]
Deletes data in current pattern
Edit Pattern
:
Allows the selected pattern to be edited.
7.7.1 Edit Pattern
- By using Joystick, move to the start position with the appropriate zoom.
- To start pattern recording, press the NEAR key. (To exit this menu, press the FAR key.)
- Move the camera with joystick of controller or run a preset function in a selected pattern which will be recorded.
- The total memory size and the remaining memory size will be displayed in the form of a bar. A maximum of 1200
communication commands can be stored in a pattern
- To save the data and exit, press the NEAR key
- To cancel recording and delete the recorded data, press the FAR key.
PATTERN SETUP
PATTERN
1
UNDEFINED
CLR PATTERN
CANCEL
<EDIT PATTERN>
BACK
EXIT
EDIT PATTERN 1
[NEAR: SAVE] [FAR: DELETE]
0/0/X1/N
Summary of Contents for XSD10Z-2
Page 23: ...23 ...
