17
7.5 PRESET SETUP
Use this menu to setup the general functions of zoom camera module.
Preset Number:
[1~128]
If a selected preset is already defined, the camera will move to predefined position and preset characteristics such as Label and
Relay Outputs will show on the display monitor. If a selected preset is not defined, ‘UNDEFINED’ shows on monitor.
Clear Preset:
[CANCEL/OK]
Deletes current Preset data
Edit Preset Scene:
Allows you to edit the current Preset scene position
Edit Preset Label:
Edits Label to show on monitor when preset runs. A maximum of 10 letters can be assigned.
CAM Adjust:
[GLOBAL/LOCAL]
WB (White Balance) and AE(Auto Exposure) can be set up independently for each preset.
z
Global mode means that WB or AE can be set up fully and simultaneously for all presets in the ‘ZOOM CAMERA SETUP’
menu.
z
Local mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each
Local WB/AE value should activate correspondingly when the camera arrives at each preset location.
z
During jog operation, Global WB/AE value should be applied.
z
All Local WB/AE values will not change although Global WB/AE values will change as the settings are changed. If ‘Local’ is
selected ‘WB/AE’ will show on the Monitor.
7.5.1 Edit Scene Preset
Using Joystick, move camera to desired position. Press NEAR key to current PTZ data. Press FAR key to Cancel.
PRESET SETUP
PRESET NO.
1
CLEAR PRESET
CANCEL
<EDIT SCENE>
<EDIT LABEL>
LABEL123
CAM ADJUST
GLOBAL
BACK
EXIT
EDIT SCENE PRESET
MOVE TO TARGET POSITION
[NEAR: SAVE] [FAR: CANCEL]
Summary of Contents for XSD10Z-2
Page 23: ...23 ...
