25
5.9 Privacy Masking
System Menu > Privacy Masking
The feature of privacy masking can be used to protect public privacy. e.g. a resident’s window, a toilet. Integrated Speed Dome
can cover a black square on some particular locations.
z
Mask No:
Display the current masking zone number. Values are 1~8 or 1~4. Pan right then tilt up or down to select another
masking zone.
z
Setting:
Select this menu item to set the position and size of the masking zone. There are two setting methods for different
model dome, please refer to your supplier which method your model is.
Method A
The setting has three steps:
1. Choose area
Move the camera to your desired area and call preset 1 to confirm.
2. Set position
Enter setting, the following window will pop up. Move the black square to the desired position, call preset 1 to save. Tip: Put the
top left corner of the black square on the desired position because the black square can expand down and right only.
3. Set size
Move the joystick to adjust the size of the black square, call preset 1 to save.
z
Activate:
Enable / disable the current privacy masking. (ON: enable, OFF: disable) The zoom times for Privacy Masking
activation is effective for certain models only. When zoom times is higher than a specific value, the dome will auto activate
the privacy mask.
z
Delete :
To delete current privacy masking.
Privacy Masking
1. Mask No
:1
2. Setting
3. Activate Empty
4. Delete
0. Back
Call Preset 1 :Position
Call Preset 2 :Cancel
Move Dome
Call Preset 1 :Size
Call Preset 2 :Cancel
Move Dome
Summary of Contents for XPS036
Page 6: ...6 4 System Connection ...
