XVision XPR16H, User Manual

Page: 48 / 122

XPR16H - User Manual
48
Fig 4-28

Step 5: The user can drag the sliding bar, at the bottom of the page, to set the sensitivity levels from 1-8 (the higher the
value the greater the sensitivity).

Step 6: Clicking the icon will set the whole area as a detection area. To remove certain areas from the detection grid
click and drag on the grid the desired area. By clicking the icon the entire detection grid will be cleared. By clicking
the icon the user will be able to test whether the sensitivity value and motion area are suitable accordingly (refer to
Fig 4-29).
Fig 4-29