Inserting a Hard Drive into the caddy
If you have bought an EDVRCD series DVR with no hard drive(s) or need to replace a hard drive
which is full follow these steps to install a hard drive(s):
1. Unlock (using keys supplied) and remove the caddy from the front of the unit.
2. Remove the lid from the caddy by pressing the release button ‘OPEN’ and sliding the lid off
backwards.
3. Place the new hard drive into the caddy and connect both the connector block and ribbon
cable to the rear of the new drive.
4. Fix the drive in place using the four retaining screws supplied (see diagram below).
5. Replace the lid of the caddy and slide forward until the lid locks.
6. Repeat steps 1-5 if you are installing another drive.
7. Once you have finished inserting the drive into the caddy, replace the caddy in the DVR and
lock by turning the key clockwise.
10
