IMPORTANT:
For NTSC and PAL the screen resolution should be set to 1024x758 pixels or above and the
colour quality set to 24bit or 32bit for play back on a PC.
Data Transfer Rate Table of different Interface Ports
Note:
1.
MB/s = 8 Mbps etc.
The following is a list of the time required to read the files structure, for the first time,
and image to the hard drive:
-USB 1.1:
takes 5 to 10 minutes
-USB 2.0:
takes 30 seconds
-IDEATA 100:
takes 15 seconds
2.
The use of USB1.1 is not recommended because of its slow transfer rate. You could
upgrade your PC from USB1.1 to USB2.0 by adding an ‘IDE/USB2.0 card’ for desktop
PCs or a PCMCIA/USB2.0 card for notebook PCs.
Install the Offline Viewer Software on to your PC
1. Insert the software CD supplied into your CD-ROM and installation will start automatically.
2. Click ‘playback software’ to install.
3. If the CD does not start automatically, please follow these steps:
3.1 Go to ‘My Computer’ and double click the CD-ROM.
3.2 Double click software folder.
3.3 Double click NR folder.
3.4 Double click ‘setup.exe’ to start installation.
After setup is complete, a shortcut is created on the desktop.
Run OFFLINE Viewer Software
(Double click the shortcut and select the required language in the pop-up window or in the
main menu).
1
2
3
4
5
Interface Port
IDE ATA66
IDE ATA100
IDE ATA133
USB2.0
USB1.1
Data Transfer Rate
66 MB/s
100MB/s
133MB/s
60 MB/s (480M bps)
1.5 MB/s (12M bps)
Recommended
(Yes/No)
Yes
Yes
Yes
Yes
No
20
