18
4)
DISK: Display the HDD state and format the HDD.
5)
INFORMATION: Display of the current configuration parameter, you can
check; system information, network information, user information and video settings
information.
6)
MAINTENANCE: Firmware can be upgraded; the frequency and schedule of
upgrading can be setup.
7)
LOGOUT: Locks the front panel button, and user name and password need to
be input when logging back in.
4.2 Basic
After you enter the menu, move the cursor to “BASIC”, and the icon will be highlighted,
click this to enter.
4.2.1 System Setup
Set up of device name, device ID, video format, VGA resolution, language, logout time
and startup wizard.
1)
Device name: Change the device name, click the input box and the keyboard will be
pop-‐up. Click the keyboard to edit the device name.
2)
Device ID: Change the device ID, click the input box and the keyboard will be pop-‐up.
Click the keyboard to edit the device name.
3)
Select “PAL” or “NTSC” from the drop-‐down box.
4)
VGA resolution: Adjust according to the VGA used. Select “1024×768” or “1280×1024”
from the drop-‐down box.
5)
Language: Select the language from the drop-‐down box.
6)
Logout time: Select “30 seconds”, “1 minute”, “3 minutes”, “5 minutes”, “10 minutes”
or “Never”.
7)
Startup wizard: Select “Off” or “On” from the drop-‐down box.
Note: After setup is completed, click “Apply” to save the setup, and click “Default” to
recover to default settings, and click “Exit” to the return.