4
2. INSTALLATION
2.1 Insert Micro SD card into the Dash Cam
2.2 Attach the mounting bracket to the Dash Cam by sliding
the mount into the mounting slot of the Dash Cam
2.3 Check position of the Dash Cam before fixing the camera
on the inside surface of the windshield. The area near the
rear-view mirror is suggested. (See installation diagram).
Make sure the windscreen is clean and free of debris. Use
an Alcohol wipe to enhance adhesion. Remove the tape off
the adhesive mount and adhere to the windshield holding in
position for 60 seconds
2.4
Insert the Mini USB end of the GPS power cable into the
Mini USB Power socket/ charging point of the Dash Cam.
Remove backing off 3M tape of GPS cable and fix to
window. For a better GPS signal ,make sure the 3M sticker
faces toward the sky and is not blocked or obstructed.
Connect USB charging end of the GPS power cable into
12/24V power socket of vehicle
2.5 Adjust the mounting bracket and rotate the camera
direction to get the best view.
2.6 Turn vehicles ignition to accessories and the Dash Cam
will power ON and start recording automatically. An audible
tone will heard once powered.
2.7 The recording indicator light will start flashing RED on the
screen and a will appear when recording has started.
2.8 For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned off
the Dash Cam will save the current file and turn off.
