www.XtremeAirUsa.com
PAGE
9
.
STEP 9: install baffle filters
1.
Angle baffle filter toward back of hood.
2.
Lift a baffle filter up above horizontal level then
slide forward into slot behind the front of hood.
To remove the baffle, please reverse the process.
Step 9
Step 7
STEP 7: Install chimney
1. Take off outsider chimney protective laminate
coating (not the inner chimney)
2. Place both the chimney on top of range hood base
3. Make sure the chimney is facing the correct
direction;
*PX02: outside chimney; screw hole on the bottom
Inside chimney; screw hole on the top
* PX01, PX03, PX04; inside chimney, screw hole on
the top.
4. Secure outside chimney to the base of the hood
(PX02 ONLY)
5. Attach the inside chimney to the ceiling mounting
bracket
6. Screw the chimney into place on both sides
STEP 8: install oil tunnel
Drop oil tunnel into recess support
near rear of hood.
Note: PX04- SKIP THIS STEP
Step 8
