www.XtremeAirUsa.com
PAGE
9
D.
Activating Smoke Detector Function:
D. Changing the clock:
While the machine is off:
1.
Touch power sign once; the hour indicator will flashing
2.
use (+) or (-) to adjust to designed hour
3.
Touch power sign again; the “minutes” indicator will flashing
4.
use (+) or (-) to adjust to designed minutes
5.
Touch power sign again to clear the screen
Note: The clock display is only available for product manufactured after October 2012.
E. Remote Control Sensor:
2. TYPE 2: TOUCH BUTTON CONTROL (FOR PX11 models ONLY)
NOTE: For best results, start the range hood before cooking and allow it to operate several minutes after the cooking
is completed to clear all smoke and odors from the kitchen.
Button functions
:
1.
(1) To power ON/OFF, and to activate power-off delay timer.
2.
(2) To decrease blower (motor) speed, decrease timer value, and enter timer mode.
3.
(7) To increase blower (motor) speed, increase timer value, and cumulative timer reset.
4.
(3) Blower (motor) is running light indicator
5.
(4) Shows current blower (motor) speed (1-4).
6.
(5) Lights up when lights turned on.
7.
(6) To turns ON/OFF lights.
8.
(8) Indicates the accumulated time the system is running.
9.
(9) Indicates the length of time left for delay off function.
10.
(10) Lights up when auto-shutdown delay timer function is on.
• While the machine is off, touch
Auto Function
button to activate the smoke detector auto function mode
NOTE: this function will only worked when there’s a lot of smoke. Once this button is touched, all
other buttons are not active.
1.
Remote control sensor receives infrared (IR) signal from the remote control. The
maximum distance for IR data transmission is 3 meter and requires direct line of
sight. The transmission distance may vary depending on temperature and remote
control battery condition.
1.
Light settings are independent from other settings (including power-off delay) and
lights have to be manually turned on or off.
2.
The system saves user configurations, settings such as light, timer and blower
(motor) speed will remain the same the next time it is turned on.
