www.XtremeAirUsa.com
PAGE
5
ELECTRICAL REQUIREMENTS:
I
MPORTANT
: Observe all governing building codes and city ordinances.
■
A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.
It is the customer’s responsibility:
•
To contact a qualified electrical installer.
•
To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/
NFPA 70 — latest edition*, or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22. 2 No. 0-
M91 - latest edition** and all local codes and ordinances.
TOOL YOU WILL NEED
:
Maker or pencil
Stud finder
Measuring tape
Powered screwdriver or drill
Flat & Phillips screwdrivers
Level
Drill with 1¼" , 1/4" (7.9 mm) drill bits
Jigsaw or keyhole saw
PARTS SUPPLIED:
Baffle Filters
(1) Instruction manual book
(1) Remote control
(except for model PX11)
R130 / PX10-U30, R136 / PX10-U36
PX11-U30 / PX11-U36
R230 / PX12-U30, R236 / PX12-U36
05
06
07
HOOD DIMENSIONS
:
08
Grease Tunel
(oil container)
(1) Screws
