4
OPERATION
1.
Attach the high pressure hose to the pressure water outlet of the machine.
2.
Attach the spray handle to the high pressure hose. Prior to operating the machine,
ensure that the high pressure hose has been completely uncoiled. Whilst the machine is in
operation the hose must not loop.
CONNECTIONS
3.
Mount the nozzle or any other equipment you want to use.
4.
Connect the machine to the water and power supplies.
1.
Pressure cleaner
2.
Water supply hose
3.
Water connection
4.
Water inlet
5.
High pressure tube
6.
Water supply hose
7.
Spray gun
8.
Power supply
PRE-OPERATION
NOTE:
To prevent damage to your surface and to select an appropriate nozzle size for your
application. Always start with the lowest pressure nozzle size and continue changing to the
higher nozzle size until the best result is achieved.
The pressure washer is furnished with four spray nozzles. Each nozzle is color coded and
delivers a specific spray pattern and pressure for a particular cleaning job.
A clogged or partially clogged nozzle can cause a significant reduction of water coming
out of the nozzle and cause the unit to pulsate while spraying. To clean out the nozzle turn
off and unplug the unit. Turn off the water supply and relieve any pressure trapped in the
hose by squeezing it 2-3 times. Separate the lance from the gun. Rotate the nozzle to the
narrow stream setting. This opens up the fan blades. Using the included tip cleaner, or an
unfolded paper clip, insert the wire into the nozzle hole and move it back and forth until the
debris is dislodged.
