background image

Electric Pressure Power Washer is constructed with a powerful 10-amp motor that 

generates 1300 PSI of maximum water pressure and a maximum flow rate of 1.2 GPM 

for light to medium duty cleaning application. Lightweight and compact so you can 

easily tote or wheel it from one cleaning task to the next.

FEATURES:

Wash everything from structures to vehicles, boats, decks, driveways, patios, truck, 

sidewalk, floors and lawn equipment etc.

3

FEATURES AND SPECIFICATIONS

Multi-functional  pressurized  jet  machine  will  pack  plenty  of  power  to  efficiently  blast 

away dirt, grease, grime, mildew, rust and oil from your home driveway, sidewalk, 

garden, outdoor furniture, vehicles and more.

Color-coded spray tips lets you conveniently select the appropriate nozzle size to tackle 

the toughest cleaning jobs, starting with the lower pressure nozzle before working to 

higher pressure for the best results.

Lightweight and compact so you can easily tote or wheel it from one cleaning task to 

the next.

Spray gun features a total stop system (TSS) to automatically shut off pump when trigger 

isn’t engaged, letting you save more energy and prolong pump life.

Max Pressure (Burst): 1300PSI

Amp: 10

Motor: 120v/60 Hz

Max. Flow: 1.2GPM

3 Interchangeable Nozzle Adapters

Certified: ETL, CSA, UL

Summary of Contents for 61032











Reviews: