Input user name, company name and serial number into the software
interface. Note: serial number is on the CD software jacket.
Choose installation location and click “next(N)”
-
6
-
XVT-600, XVT-800, XVT-1200 and XVT-1500 User's Manual Uninterruptible Power Supply (UPS)
-
11
-
6. Remove the defective battery from the battery compartment.
7. Disconnect the battery positive (red) wire from the battery positive (+) terminal.
8. Turn the power switch on, to discharge the UPS.
9. Disconnect the battery negative (black) wire from the battery negative (-) terminal.
10. Set the defective battery aside.
11. Connect the battery negative (black) wire to the battery negative (-) terminal on
the new battery.
12. Connect the battery positive (red) wire to the battery positive (+) terminal on the
new battery.
Note:
Some sparking may occur, this is normal.
13.
Install the new battery into the battery compartment. DO NOT pinch the battery
wires in between the battery and the case.
14. Reinstall the battery compartment door and the retaining screws.
15. Properly dispose of the old batteries at an appropriate recycling facility or return
them to the supplier in the packing material for the new batteries.
16. The UPS is now ready for normal operation.
Retaining
Screws
XVT-600, XVT-800, XVT-1200 and XVT-1500 User's Manual Uninterruptible Power Supply (UPS)
