P91 Lead Acid 2U User
’
s Manual
Uninterruptible Power Supply
Xtreme Power Conversion Corporation
Page 32
P90, P90L, P90g, P90Lg, P91
50,000
Term of XPC Limited Warranty
T91
50,000
Term of XPC Limited Warranty
TX91, TX91L
50,000
Term of XPC Limited Warranty
This Load Protection Policy is not deemed "first dollar" coverage. XP
C’s
obligation is reduced by any amounts
that the Purchaser is entitled to recover, from other sources regarding the Connected Equipment, including,
but not limited to, insurance, other warranty, extended warranty, or legal liability, regardless of whether or
not the Purchaser makes a claim for recovery.
Eligibility for Coverage Under the Load Protection Policy
1.
The Product must be registered on the XPC website,
, within 10 days of purchase.
All required information must be provided, and Purchaser should retain a copy for Purchase
r’s
records. When registering on the website, Purchaser must list all connected equipment that is
directly connected to the product. Only those devices registered in that manner will be covered.
2.
All Connected Equipment must be UL or CSA approved.
3.
The Product must be plugged into a properly wired and grounded outlet. Use of input surge
devices, extension cords, adapters, ground wires, or electrical connections not manufactured by
XPC voids the XPC Load Protection Policy. No other surge protection device may be connected to
the output sockets of the Product. The installation must comply with all applicable electrical and
safety codes set forth pursuant to the NEC.
4.
The Product must have undeniable physical evidence of a Power Disturbance that directly and
proximately caused the damage;
5.
The Connected Equipment must have been damaged by a Power Disturbance on a properly
installed, grounded, and National Electric Code, ("NEC"), code-compliant 120, 208, 240 Volt AC
power line in the United States or Canada, by a Power Disturbance on standard telephone land
line or PBX telephone equipment line that is properly installed and connected to an RJ11 port on
the Product; or by a Power Disturbance on a standard Local Area Network connection that is
properly installed and connected to an RJ45 port on the Product and (d) is directly plugged into,
and properly connected to, the Product in its original condition which was properly operated
when a Power Disturbance passed through the Product and (i) exhausts the protection capacity of
the Product or (ii) damages the Product.
6.
The Load Protection Policy does not apply if the Product has been operated in a failure mode or
not in compliance with XPC operating instructions in the Product user's manual, or if the
Connected Equipment has not been operated in compliance with the instructions and manuals of
its manufacturer/vendor.
7.
This policy is null and void if, XPC determines, in its sole discretion, that the Product has been
tampered with or altered in any way.
What is Not Covered Under the Load Protection Policy:
