3. Adjustment on the sensitivity: When the packing material has been put in the right
place, slide the film through the film guide plate at the photocell, make the packing
material align with the registration mark area, switch the MODE key on the fiber amplifier
to SET status, and press ON key, when put the fiber head on the non- registration mark
area, then press the OFF key, at last, press the MODE key to return to the original status.
At this time, slid the packing material, when light source casts on the non-color-mark area,
the red indicator won't be on; When the light source casts on the non-color-mark area, the
red indicator will on, if not, please readjust!
6.3
Pocket open adjustment
I .Make sure the slit pocket machine as shown in figure (a) correct assembly
2.If the pocket open machine assembly as shown, a displacement, please make the following
adjustment
1) Open the manual operation, make robots take the bag to the pocket open position.
2) Loosen the hand bag opening and spindle fastening screws
3) Loosen the fastening screw, and then tum the bag opening machine, makes the bag
opener and mechanical alignment
4) Locked tightly screw fixation
6.4 Bag Suction adjustment
XtraVac RBF8 Rotary Bagger Operation, Service, & Parts Manual
XtraVac Packaging Machines
RBF8 - Rotary Bag Filling & Sealing Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800-728-2999 • [email protected]