B. MCM-W HyperTerminal Command – counter
Command Descriptions – counter
show
The
counter show
command allows you to view all MCM-W’s counter report.
¾
C:
Press
C
to clear all counters.
¾
S:
Press
S
to stop/start refreshing counters.
¾
P:
Press
P
to switch pages. MCM-W’s counter report has 2 pages.
¾
Esc:
Press the
Esc
key to exit MCM-W’s counter report.
0
Clear all counter reports of MCM-W’s Port A.
1
Clear all counter reports of MCM-W’s Port B.
clear
all
Clear all counter reports of MCM-W’s Port A and Port B.
show
The
refreshtime show
command allows you to view the refresh time for the
report.
counter
refreshtime
set
The
refreshtime set
command allows you to set the refresh time (in seconds)
for the report.
C. MCM-W HyperTerminal Command – ip
Command Descriptions – ip
show
The
ip show
command allows you to view information of MCM-W’s IP configuration.
status
The
ip status
command allows you to view information of MCM-W’s IP status.
dhcp
The
ip mode dhcp
command allows you to set MCM-W’s IP acquiring mode to
DHCP, allowing MCM-W to acquire IP automatically from DHCP server.
mode
static
The
ip mode static
command allows you to set MCM-W’s IP acquiring mode to
Static, allowing you to set IP/Subnet Mask/Gateway IP manually.
address*
The
ip address <IP Address>
command allows you to set MCM-W’s IP address. For
example, to set MCM-W’s IP address to 192.168.1.20, please input the command “
ip
address 192.168.1.20
”.
mask*
The
ip mask <Subnet Mask Address>
command allows you to set MCM-W’s subnet
mask address. For example, to set MCM-W’s subnet mask address to 255.255.255.0,
please input the command “
ip mask 255.255.255.0
”.
ip
gateway*
The
ip gateway <Gateway Address>
command allows you to set MCM-W’s gateway
address. For example, to set MCM-W’s subnet gateway address to 192.168.1.254,
please input the command “
ip gateway 192.168.1.254
”.
*MCM-W’s default IP address/subnet mask/default gateway are 192.168.1.8/255.255.255.0/192.168.1.1
43
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
