manualshive.com logo in svg

Xtramus MCM-7S81-W, User Manual

Share
Download
Xtramus MCM-7S81-W User Manual Download Page 28

 

3.1.4.

 

MCM-W Management Webpage – DDMI

 

  DDMI (Digital Diagnostics Monitoring Interface) includes 5 parameters : 

Temperature (

℃

)

, 

Supply 

Voltage (mV)

, 

Tx Bias Current (mA)

, 

Tx Power (mW)

 and 

Rx Power (mW)

. 

 

DDMI (Digital Diagnostics Monitoring Interface) 

Temperature 

(℃

)

 

Shows the current temperature, the maximum/minimum temperature 
supported and the warning maximum temperature.   

Supply Voltage (mV)

 

Shows the current supplied voltage, the maximum/minimum supply voltage 
supported and the warning maximum supply voltage. 

Tx Bias Current (mA)

 

Shows the current Tx Bias Current, the maximum/minimum Tx Bias Current 
supported and the warning maximum Tx Bias Current. 

Tx Power (mW)

 

Shows the current Tx Power, the maximum/minimum Tx Power supported 
and the warning maximum Tx Power. 

Rx Power (mW)

 

Shows the current Rx Power, the maximum/minimum Rx Power supported 
and the warning maximum Rx Power. 

Note: Some transceiver 

can’t

 support DDMI function, or can only capture part of DDMI parameters, 

and when this happen, the MCM-W Management Webpage will show 

n/a

 on each not captured 

parameter field.

 

Please check with your transceivers supplier if their transceiver can support or not 

on capturing the DDMI parameters. 

 

 

 

 
 

28

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

®

 

Summary of Contents for MCM-7S81-W















































Reviews:

No comments

Brands by name

Popular brands

Load more brands