Command Descriptions – system
system
(Contd.)
update firmware/FPGA
The
system update [firmware/FPGA]
commands allow you to
upgrade MCM-W’s firmware/FPGA. The following descriptions are for
upgrading MCM-W’s firmware. However, procedures for upgrading
MCM-W’s FPGA are quite the same and can be related.
1. Type in “
system update firmware
” and click
enter
. Press
Y
to
proceed and start upgrading firmware, or press
N
to cancel.
2. Press
Transfer
on HyperTerminal’s menu bar and choose “
Send
File
”.
3. A
Send File
window will pop up. Please set the
Protocol
to
Xmodem
, and click the
Browse
button.
4. Choose the firmware you would like to upgrade to and click
Open
.
41
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
