Xtralis ADPRO Presidium Mini, Installation And User Manual

Page: 99 / 102

ADPRO Presidium Mini by Xtralis Installation and User Manual
Doc. 14294_02
89
Appendix I: Installation Quick Reference
This appendix provides a quick reference guide for installation of a Presidium Mini system.
Camera Alignment
Align the camera as described in the site design/plan documentation.
Test the alignment by measuring the FOV at the near range and the
maximum range.
PIR Alignment
Align the PIR as described in the site design/plan documentation. Test
the alignment by a manual check or using test software to confirm
detection.
Set Detection Areas
Set the detection areas on each camera on Presidium Mini to mask out
any unwanted areas that are unavoidably within the FOV of the camera.
Program Detection Parameters
Program the detection parameters in each Presidium Mini channel. Use
the suggested typical settings as described in this document and adjust
later as required.
Test System
Perform walk/run tests in each detection area to check that the
Presidium Mini/PIR is functioning as expected. Alter parameters as
required to achieve detection/reject nuisance alarms and retest as
appropriate. Save the final configuration for all channels.