Xtralis ADPRO Presidium Mini, Installation And User Manual

Page: 72 / 102

Installation and User Manual ADPRO Presidium Mini by Xtralis
62
Doc. 14294_02
4.4.7 Security Tab
Figure 48: Security Tab
Access/Secure Input Type
The Access/Secure input allows the Presidium Mini to be independently set into the Access state
of operation. This input is usually connected to an alarm panel or access control system.
Refer to Access/Secure Input on page 40 for more information.
1. Select the type of the Access/Secure Input:
-
Normally Open - No End Of Line (NEOL) Resistor
- Normally Closed
- Normally Open SEOL - Single End Of Line Resistor
- Normally Closed SEOL
- Normally Open DEOL - Dual End Of Line Resistor
- Normally Closed DEOL .
Note: If the Presidium Mini is to be connected to a FastTrace / FastTx / FastTrace-R,
ensure the Access/Secure input is set in the default state of
Normally Open and
that nothing is connected to this input. This ensures the Presidium Mini is in the
Secure state at all times and access is controlled at the FastTrace / FastTx /
FastTrace-R.
Authentication
Presidium Mini requires a Username and Password for setup or software upgrade.
The default password (and username) is ‘admin’, this should be changed to a user defined
password.
The new password takes effect once the Save to Presidium... button is pressed.