Xtralis ADPRO Presidium Mini, Installation And User Manual

Page: 71 / 102

ADPRO Presidium Mini by Xtralis Installation and User Manual
Doc. 14294_02
61
No-Video Detection
When checked, Presidium Mini will generate an alarm in the event of lost video on this camera
channel, for the defined time, due to camera disconnection or output failure.
Note: A no-video alarm will not be generated if the channel is isolated.
1. Once all Video Monitoring settings are complete, select Finish .
2. Repeat the channel configuration for all channels.
Once all channels are configured, the following optional settings may be adjusted.
4.4.6 Network Tab
The Network screen enables a device name to be entered and the Presidium Mini IP address to
be changed, if required.
Device Name
The Device Name will be displayed in the list of local units when connecting to a Presidium Mini
(refer to Figure 31).
IP Address Configuration
Note: If the Presidium Mini is to be connected to a FastTrace / FastTx / FastTrace-R, a
static address in the same range, with the same subnet mask as the FastTrace /
FastTx / FastTrace-R, must be entered, (refer to
Connection to Xtralis ADPRO AFT
/ AFTX / AFTR on page 79 for more details).
Select the Configure... button to display the IP Address Configuration screen.
Figure 47: IP Address Configuration
Note: Presidium Mini has two IP addressses. The second IP address is automatically
assigned to the next address when static IP addressing is used.
The port used to accept connections may be changed, if required. By default, the port used is
port 80. The valid port range is 80 - 65535 (excluding 88 and 20001 - 20004). The default port
should be used in most installations.