LWP LED WALLPACK
3. Disconnect the Quick Disconnects and set door (and LED plate on Small) aside.
4. Insert supply wires through all thread and install the mounting plate, gasket and o-ring to standard
junction box, in the order shown below, using the included screws and the appropriate holes. (See
Figures 3 & 4)
5. Remove the center plug from the housing. Mount housing onto the all thread and use the nut
provided to attach the fixture to the wall plate. Be sure to put convex side of nut against housing as
shown below. Use 1-1/16 inch socket wrench to tighten nut. (See Figures 4 & 5)
Figure 3
Figure 5
Mounting
Plate
All thread
Center
Plug
All thread
Wall
Gasket
O-ring
Fixture
Housing
Nut
Figure 4
