1
GB
I
mportant Note to the Installer:
Please ensure that this document is passed to the user as it
contains important guidelines on operation, loading, cleaning
and general maintenance and should be kept for reference.
General Electrical Safety
Foster Refrigerator recommends that the equipment is electrically connected via a Residual Current Device; such
as a Residual Current Circuit Breaker (RCCB) type socket, or through a Residual Current Circuit Breaker with
Overload Protection (RCBO) supplied circuit.
Disposal Requirements
If not disposed of properly all refrigerators have components that can be harmful to the environment. All old
refrigerators must be disposed of by appropriately registered and licensed waste contractors, and in accordance
with national laws and regulations.
Start-Up and Operation
After unpacking, clean and allow the cabinet to stand
for 60 minutes bef
ore turning on
(cleaning
directions supplied within this manual)
. Ensure the cabinet is situated on a firm, level surface, away from both
hot and cold air sources, as this will affect it’s performance.
Make sure that a minimum clearance of 50mm above and around the cabinet is available for ventilation and
effective operation.
Connect the unit to a suitable mains power outlet and turn the supply on. Please do not plug or unplug the unit
with wet hands. The cabinet will start automatically displaying the actual internal temperature of the unit (area
where product is stored).
As the operating temperature has been pre-set no adjustments are required. Allow the cabinet to reach its normal
operating temperature before loading with product.
Display Icons and Buttons
Icons
Buttons
Alarm Warning
Info & Set Point
Thermostat Output Active
Manual Defrost & Decrease
Fan Output Active
Increase & Manual Activation
Defrost Output Active
Standby/Exit
2nd Parameter Set Active
Standby
Pressing
the power switch for 5 seconds will turn the unit on or into standby. When in standby the display will
show
