5
For more cool and exciting XTM Racing products, visit our website at http://xtm.globalhobby.com
Section 3: Preparing to Run Your Baja Bullet Electric Truck
Now that you are familiar with the major component parts of your truck, and with the functions of the Hitec Lynx Sport transmitter, it's
time to prepare your model for its first run.
Let's Get Started:
❑
Push the antenna down into the molded hole in the top of the
transmitter.
❑
Thread the antenna (clockwise) into place and tighten it gently
until is stops.
❑
Remove the plastic battery cover.
❑
Install 8 AA Alkaline batteries into the battery tray, making
sure that the polarity is correct.
❑
Reinstall the battery cover.
❑
Carefully insert the end of the antenna wire into one end of the
plastic antenna tube.
❑
Slide the antenna through the tube and out the other end.
Note:
If you find it hard to slide the antenna through the tube,
apply a light coat of Windex
®
to the antenna to make it slide easier.
