4
Operation
Startup
1.
Check that the accessory is
securely attached to the collet
before plugging the power
cord.
2.
Grip tool and rotate to view
the power and speed dial.
3.
Switch the On/Off button to
the ON position
4.
Adjust the speed dial to the
appropriate speed.
5.
Test the accessory on a small
portion to ensure that the
speed is set to the proper
speed
CAUTION:
Protect your eyes
while working with power tools.
Always wear protective eye wear
when operating this tool.
Low Speed Uses:
Certain materials such as plastics
require slow speed to prevent
melting. Slow speeds are
usually used for polishing, and
delicate projects.
NOTE:
Incoming voltage affects
the speed of the tool greatly.
Decreases in voltage, may cause
the speed of the rotary tool to
drop.
Stand Setup:
CAUTION:
Keep your workplace
clean at all times to prevent injury.
NOTE:
For the majority of
applications, the rotary tool
should be set to the maximum
speed.
High Speed Uses:
High speeds are generally used
for carving, cutting, drilling,
routing, snapping, and cutting
dadoes or rabbets in wood.
Hardwoods, metals, and glass
require high-speed operation.
WARNING:
Do not use grinding
wheels over 1"diameter. The high
speed may cause a larger grinding
wheel to fly apart or cause
personal injury.
1.
Take the stand base and place
on a table edge with the
tightening screw at the bottom.
2.
Tighten the stand and screw in
the stand.
3.
Twist the stand clockwise to
loosen the stand to adjust the
height. Twist stand counter-
clockwise to tighten.
4.
Hook the back of the rotary
tool to the stand.
Summary of Contents for XT107050
Page 14: ...XT107050 SZLIFIERKA PROSTA MINI 135W PL ...
Page 21: ...7 ...
Page 22: ...XT107050 MINI ROUTER S1J WLK 201 EN ...
Page 29: ...7 ...
