XTline XT106390, Operation Manual

Page: 39 / 41

- The oscillation frequency may be adjusted by rotating the regulator located
in the body of the grip. You may adjust it even while operating the tool. The
controller is marked from minimal to a maximal level of oscillation (per
minute).
- Rotate the controller evenly according to the material type and requested
work type. Generally, a lower speed is used for harder and tougher materials
(metal), while the maximal speed is used for soft materials (wood). The
proper speed may differ according to material thickness. The suitable
oscillation speed is achieved by practical testing.
- Stop your work at regular intervals in a long-term use. Use a lower
oscillation speed and let the tool turned on for a short period of time in order
to let cool down by the airflow.
5. Tool handling
- Hold the tool firmly at the front and rear grip (see the following figure).
6. Safety precautions for the tool manipulation
- The tool shall not be operated by mentally or physically handicapped
individuals, insufficiently trained individuals and children.