Chamfering
To make a chamfering cut , align the "V"
grooves in the front base with the edge of the
workpiece and plane it.
1. V groove
2. Edge of the workpiece
1
2
MAINTENANCE
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment
should be performed by authorized factory or service centers, always using original replacement parts.
Chip discharge opening cleaning
Clean the chip discharge opening regularly.
Use a compressed air to clean the clogged chip discharge opening.
