Xterra SB540r Bike
10
STEP 3: Console Mast & Seat Back
•
Secure the
seat back assembly
(5) to the seat carriage with six 3/8 x 3/4 bolts (101) and
3/8 flat washers (71).
Make sure these bolts are very tight.
•
Run the two wires (107 & 109) through the bottom of the
console mast
and out the hole at
the top. Slide the console mast into the mating tube; pull slightly on the two wires while you
install the console mast so they do not get pinched. Secure the mast with six 5/16 x 3/4
bolts, four 5/16 Washers (70) on the side bolts and two 5/16 curved washers (102) on the
two front bolts. Make sure to start all six bolts first before tightening all the way.
Summary of Contents for SB540r
Page 1: ...OWNER S MANUAL...
