![background image](http://html.mh-extra.com/html/xterra/fs5-4e/fs5-4e_owners-manual_890226012.webp)
10
FS5.4e Elliptical
#117
. M5 x 15mm
Phillips Head Screw
(4 pcs)
#112
. 3.5 x 12mm
Sheet Metal Screw
(4 pcs)
4
Hardware Step 4
1. Bring the front (87) and rear (88) Handle Bar Covers together on the left
Swing Arm shaft and secure using two Sheet Metal Screws (112) and a
Screwdriver (158). Repeat this step on the right side with the front (89)
and rear (90) Handle Bar Covers.
2. Attach the Slide Wheel Cover (85) to the left Pedal Arm (2) with two Phil-
ips Head Screws (117). Tighten with the Screwdriver (158). Repeat this
step on the right side with Slide Wheel Cover (86).
3. Line up the Rear Bar Cover (95) to the holes in the rear of the Incline
Rail Assembly and snap into place.
Plastic Covers
Note: Use the Phillips Head Screw Driver (158) to tighten the hardware in this step.