8
FS5.4e Elliptical
#102
. 5/16” x 15mm
Hex Head Bolt (2 pcs)
#113
. 5/16” x 15mm”
Button Head Socket
Bolt (2 pcs)
#122
. 8.5 x 26 x 2.0
Flat Washer (4 pcs)
2
Hardware Step 2
1. Slide the Lower Swing Arms (L) and (R), (4) and (5) onto each side of
the Console Mast Axle. Secure each side with a Flat Washer (122) and a
Hex Head Bolt (102). Tighten with the Wrench (156).
2. Insert the shaft of the left Connection Arm (7) through the bushing of the
left Pedal Arm (2) and secure with a Flat Washer (122) and Button Head
Bolt (113). Tighten with the M5 Allen Wrench (157). Repeat this step on
the right side.
3. With the M5 Wench Allen (157) and the Screwdriver (158) remove the
Rod End Shaft (18) from the Connecting Arm (7). Slide the bushing
of the Lower Link Arm (4) into the bracket end of the Connecting Arm
(7). Secure in place with the Rod End Shaft (18), Washer and Screw
that was removed earlier in this step. Tighten with the M5 Allen Wrench
(157) and Screwdriver (158). Repeat this step on the right side.
Connecting & Lower Swing Arms