19
Click [Pause] to pause download manually. Click [Start] to continue to download the
unfinished files. Click [Delete] to delete the downloaded files. Click [Close] to close the
download information interface.
4.4
Set System Parameters
4.4.1
System Settings
See below picture for the interface of “System Settings”:
[System Clock]: click “synchronize with system” to synchronize the date and time of
IP camera with those of the PC.
[Network Clock Setup]: after starting the function, switch on NTP switch and select
time zone, save it to turn to [Liveview], the system time that has been automatically
corrected by NTP server can be displayed.
[System Information]: Display device name, device number, etc. Device name can
be user-defined.
[Reset]: All device parameters (including network parameters, excluding physical
address) will be recovered as factory setting values.
[Reboot]: Click [Reboot], the IP camera will restart automatically after 5 seconds.
[Upgrade]: Click “Review” button and select a correct upgrade file (kernel file,
suffix.uot). Click [upgrade], and then, you can upgrade your system. The completion
rate will be displayed during this process. After upgraded, IP camera will be restarted
automatically. Re-log in device, enter into system setup page and check to see whether
