12
then, input “command” or “cmd”(Windows 2000/XP system). Click “confirm” and then
input “ipconfig” and press “Enter” button, you will get the following information:
Now please remember the above IP Address, Subnet Mask, Default Gateway, then,
set the IP address of mega pixel ip camera according to your local PC IP address. For
example: 192.168.1.100.
Please make sure the Default Gateway and Subnet Mask should be the same as
your PC. And its IP should not be conflict with other PC or IP devices.
Click
【
Set
】
to get the following window:
Modify related network parameters and click “OK”, then, the IP camera will save
the parameters and restart.
3.2
Check Connection
Check to see whether the IP camera is running and properly connected. Click
“Start”
→
“Run”
→
input “cmd” and press “Enter” Key to open command window. Input:
ping 192.168.1.100 and click “Enter” button, then, the interface as below will be shown:
