XtendLan XL-ICA562M1CIR, User Manual

Page: 49 / 83

48
Motion Detection function can be affected on excessive sense-up.
4.7.1 MD Function
Select Motion detecting function 'Enable' or 'Disable'.
4.7.2 Motion type setting : Area / Block
It provides two kinds of motion type(Area / Block)
The area type can setup the motion through the web administrator’s page only and the block
type can setup the motion through the CMS. If you changed the motion through the CMS, you
can’t check the detail on the web page. It means that you can check the details on the CMS only.
It only provides the function which motion type will be used.
4.7.3 Motion setting
MD Area 1 & MD Area 2 can be set separately.
(1) Sensitivity
Setting up sensitivity to detect motion to adjust input video by situation. You can select 0~100,
and 100 is the highest. Recommended level for normal picture is 70 to 90.
Default value : Resets the camera settings to the factory defaults.
4.7.4 MD Area
There are 2 motion area and 1 exception area. To set the detecting areas, click radio
button and push the left mouse button and drag where you want to set. To move the area
where you already set, when there is '
☜
' on your mouse point, push the left mouse
button and drag to the area you want. Click "Refresh" button to see the current video
picture.
Click ' ' button to save.