8
Rear panel interfaces descriptions (from left to right and top to bottom):
1. Standard Ethernet (UTP) RJ45 (10M/100M self- adaptive).
2. 1 channel voice talk inp ut,3.5mm audio interface, 2.0
～
2.4Vp-p, 1k
Ω
.
3. 1 channel voice talk o utput, 3.5 mm audio interface, electric line level, 600
Ω
.
4. Power lamp.
5. Power supp ly (DC12V). Please refer to the appendix for detailed specification, and always remember
to use a matched regulator.
6. 1 channel alarm output (1A 1B). Please refer to Section 2.3.2 for pin definition.(The external
series-wound power shall be under 12V DC/ 30 mA.)
7. 1 channel alarm input signa l(IN,G).
8. RS-485 bus interface
（
T
＋
T-
）
.
9. SD card slot (Support SDHC ).
10. Standard BNC for 1 channel video output.
Fig. 2.2.6 Rear Panel of XL-ICA-105M2 camera
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).
2
1 channel voice talk input,3.5mm audio interface, 2.0
～
2.4Vp-p, 1k
Ω
.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600
Ω
.
4. ANT interface, it is use for install antenna slot.
5. 1 channel alarm output (1A 1B). Please refer to Section 2.3.2 for pin definition.(The external
series-wound power shall be under 12V DC/ 30 mA.)
6. 1 channel alarm input signa l.
7. RS-485 bus interface
（
T
＋
T-
）
.
8. Standard BNC for 1 channel video output.
9. SD card slot(Support SDHC )
10. Power supply indicate lamp.
11. Power supply interface of AC24 V and DC12V.
