41
When network camera is connected to WAN with PPPoE, it will get an IP address, and send its name
and the IP to the DNS server. The client software will immediately connect to the PC that used as the DNS
server to tell it that network camera is waiting for access. Then the server will search for all the registered
network cameras, and match the camera with this IP. When the IP address is returned, the client software
will connect to the network camera to get the video.
Operations: Run the client software 4.01, select “Configure”Æ
“Server Configuration” select network
camera.
In the right tree, input “Server Name” & “DNS Host IP” in the “Server Configuration” box as Fig 4.1,
and click “Confirm”. Select “Configure”-> “Device Management”, do uble click the network camera name
you just added, the “server attribute” message box will pop up as Fig. 4.2. Make sure that the “sever name”
is consist with the sever name in “remote config”; and select “private DNS” in “register mode”; then
input the IP address of DNS server in “DNS address”, click “Confirm”. Then you can preview the picture
in the “pr eview” menu.
Fig.4.2 DNS Server
