XtendLan G.SHDSL.bis Router XL-GRT402S, XL-GRT404S, User Manual
Chapter 4 Diagnostic and Troubleshooting
We could simply judge whether connection is correct or incorrect from the
status of LED. Please refer to the list below for status of connection.
Description
Suggestion
Make sure Power LED, Ethernet LED, and
DSL LED are lighted.
Check all connections whether ware correct, including
DSL Line, Ethernet cable and power adapter.
Ethernet LED start to become blink yellow
while RJ-45 line has just plugged, it will turn to
yellow (No blink) while connection is
established.
If your Ethernet LED no light, make sure the RJ-45 you
using is connected properly (Please use the crossover
Ethernet cable)
DSL LED start to become blink yellow while
DSL line has just plugged and start to train the
DSL Link, it will turn to yellow(No blink) while
connection is established.
If the DSL LED is still blinking, is means that Router is
training the DSL Line and connection is not
Established, in this case, Please make sure your ISP
User name
and
password
are correct or check DSL
Link is connected properly.
-54-
