XtendLan G.SHDSL.bis Router XL-GRT402S, XL-GRT404S, User Manual
Frame
Access type
Acceptable Frame Type setting. Each bridge interface can be configured
to accept all frames or only tagged frames.
all
Ingress
filtering
Ingress Filtering Setting. Accepts VLAN tagged frames, only if the VLAN Id
in the frame has this interface in its egress interface list.
false
User priority The user priority to regenerated user-priority mapping for a bridge
interface.
0
Transport
Name of attached transport.
Priority map The mapping of user priority in the incoming frames to the regenerated
user priority that would be used for traffic class mapping as well as set in
the VLAN tag of the outgoing frame. How to configure is introduced in the
following section.
Priority map configuration
Click on priority map for a specified bridge interface, and then the Priority Map for the
bridge interface page is displayed. In this page, number of traffic classes, user priority
to regenerated priority map and Regenerated Priority to Traffic Class Map are provided
to configure. The procedure is shown as follows:
1. Number of traffic classes, as shown in the following figure, specifies the number
of traffic classes supported by the bridge interface. It can be any value between 1
and 8.
2. User Priority to Regenerated Priority Map, as shown is the following figure,
specifies the mapping of user priority in the incoming frames to the regenerated
user priority that would be used for traffic class mapping as well as set in the VLAN
tag of the outgoing frame.
-48-
