XtendLan XL-EFM404 G.SHDSL .bis EFM Modem User Manual
V0.01
In the table of current community pool, you can setup the access authority.
Status: Set Enable for modify this item.
Access Right: Deny for deny all access
Read for access read only
Write for access read and write.
Community: it serves as password for access right.
After configuring the community pool, press Modify.
The browser will prompt the configured parameters and check it before writing into
EEPROM.
Press Restart to restart the EFM modem working with the new parameters and press
Continue to setup other parameters.
In the table of current trap host pool, you can setup the trap host.
SNMP trap is an informational message sent from an SNMP agent to a manager. Click Modify
to modify the trap host pool.
Version: select version for trap host. (Version 1 is for SNMPv1; Version 2 for SNMPv2).
IP Address: type the trap host IP address
Community: type the community password. The community is setup in community pool.
Press OK to finish the setup.
The browser will prompt the configured parameters and check it before writing into
EEPROM.
Press Restart to restart the EFM modem working with the new parameters and press
Continue to setup other parameters.
3.8 Utility
This section will describe the UTILITY of the EFM modem.
39
