XtendLan XL-EFM404 G.SHDSL .bis EFM Modem User Manual
V0.01
3
Configuration use Web Browser
3.1 Configuration
method
There are three methods to configure the EFM modem: serial console, Telnet and Web
Browser. Users have to choose one method to configure the EFM modem.
For Web configuration:
Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the
modem. TCP/IP protocol is necessary for web configuration, so please check the TCP/IP
protocol whether it has been installed.
The EFM modem provides a browser interface that lets you configure and manage the EFM
modem. After you set up your IP address for the EFM modem. You can access the EFM
modem’s Web interface applications directly in your browser by entering the IP address of
the EFM modem.You can then use your Web browser to list and manage configuration
parameters from PC.
Web Configuration requires Internet Explorer 5.0 or later or Netscape Navigator 6.0 and later
versions. The recommended screen resolution is 1024 by 768 pixels.
For serial console configuration:
For Serial Console, users can directly connecting a terminal or a PC equipped with a
terminal-emulation program (such as Hyper Terminal) to the EFM modem’s serial console
port.
Use the supplied serial cable (RJ-45 to DB9F) is required to connect the EFM modem to PC.
After marking this connection, configure the terminal-emulation program to use the
following parameters: 9600 bps , 8 data bits , no parity and 1 stop bit.
For Telnet configuration:
Make sure that Ethernet Adapter had been installed in PC or NB used for configuration of the
modem. The EFM modem also supports telnet for remote configuration. The command is
“
telnet 192.168.1.1”
. It with asks for user name and password for remote login when using
telnet, please use “admin”
for username and “admin”
for password. All display screen are as
same as serial console configuration.
The IP address 192.168.1.1 is the default vaule and you can change to another one for you
application.
11
