You can select whether to allow using the printer. If it is allowed, then you
can input the printer name, select local port, the manufacturer and the printer
driver. If the local port is selected as serial port, then you can configure the
serial port property through the serial port property button. After login to RDP
server, the local printer would be mapped as the printer of the server. If
you select the user defined printer, then you can input the user defined printer
name and driver.
As the picture shows below:
Printer Settings
5.
Display
In this property page, you can set the display color, window size and connection bar after
logging to the server through RDP connection.
The window size can be set as full screen or 60% to 90% of the screen size.
There are four options for display color: 8 bit, 16 bit, 24 bit and 32 bit.
If you select “Show the connection bar only in full screen mode”, then there would be a
connection bar on the top of RDP full screen. Users can minimize and close the RDP connection
window using this connection bar.